What Happens During an ECU Remap?

Firstly we will discuss what the customer wants to gain from having their vehicle re-mapped and give honest, professional advice and suggestions. Once we have done this we will subject the car to a full inspection and diagnostic test of the vehicles electrical systems to ensure that everything is in good working order, any faults found will be dealt with at this stage before any tuning is carried out.

The next stage of a re-map is to read the information held by the ECU (via the vehicles diagnostic port) and make an identical copy. We then install the vehicle onto our rolling road to test its current power and torque outputs as well as monitoring fueling and turbo boost.

We then use our wealth of knowledge and experience to re-calibrate various parameters within your original map. This map is then re-loaded and we repeat the rolling road test. We will usually be very close to the desired results at this stage, but some fine tuning is usually required. The job is not complete until we are 100% satisfied with the way that the car is performing on the rolling road.

The vehicle is then road tested and once again we carry out a full diagnostic test to ensure that the tuning has not upset any of the vehicles electronic systems. Your original map is then uploaded to our secure database in case you ever wish for it to be re-loaded to your ECU in the future.

We are so confident in our tuning that every re-map comes with a 7 day test period for you to test your car, if you are not 100% delighted we will be happy to re-tune or offer a full refund!